• Address PO Box: 1386 | PC: 133 | Sultanate of Oman
  • E-mail info@stalwartfm.co
  • Phone +968 90195868

RO Plant Installation and Maintenance

Reverse osmosis is a system that uses pressure to force water through a semi-permeable membrane in order to remove the vast maturity of pollutants from water. This is the contrary of the usual osmosis process, which occurs naturally when no external pressure is applied and involves the passage of solvent through a membrane from a region of low solute attention to an area of high solute attention. Since the membrane in this case, is semipermeable only detergent can pass through, but not solute. In the thick polymer hedge sub caste of the membranes used in rear osmosis systems, separation occurs. Since rear osmosis doesn’t do naturally, it must be produced by applying pressure to the high solids water in order to force it through the membrane. Fresh and brackish water bear pressures between 8 and 14 bar, while seawater requires pressures between 40 and 70 bar, as the natural osmotic pressure of seawater is 24 bar( 350 psi), which must be overcome.

Other benefits of RO include :

  • A separation is carried out by RO without a phase change. Accordingly, there’s a reduced need for energy.
  • The space conditions for RO systems are lower than for other desalting technologies, including as distillation.
  • Multitudinous RO systems are fully automated and made to start and stop on their own through interlocks. RO plants thus generally bear little labor.
  • Their modular construction makes maintenance simple. It’s possible to carry out listed maintenance without shutting down the entire factory. Also, the modular armature makes easy expansion possible.